It is composed of a dust cover, a winding shaft with hooks on the surface, a shaft wheel with two slots, a micro motor, two shaft seats, two frames, two brackets, two steel balls, top wires and It consists of fixing screws. There is a semicircular groove at both ends of the winding shaft, a semicircular groove at one end of a shaft seat and a top wire, and the steel ball is placed in the two semicircular grooves.
Manual roller blinds are widely used in various places because of their beauty and simplicity, economical and practical, firm and durable structure, etc., especially suitable for small-area windows and small glass curtain walls for sunshade.
When the roller blind is raised, its volume is very small, so that it is not easy to be detected; when the roller shutter fabric is put down, it can make the indoor light soft, avoid the trouble of direct sunlight, and achieve a good shading and shading effect, especially the white paint The layered fabric can also effectively regulate the indoor temperature and reduce carbon emissions.
The manual ball-pulling roller blind system is mainly made of high-strength engineering plastics as raw materials, and is a mechanism modulated by the mechanical principle of one-way control of the passive shaft to implement rotary motion when the coil spring is twisted.
Within the rated load range of the roller tube, to ensure that the fabric will not slide down due to its own weight, relying on manual operation to pull the bead to realize the transmission, the fabric will rise or fall, and the operation is smooth and stable; the bead roller blind can be divided into plastic pull There are two types of beads and stainless steel beads, single-width hand-pulling operation, and the height is generally 3-5m. The total area does not exceed 10 square meters.
Contact Person: Judy Jia
WhatsApp: +8615208497699
Email: business@groupeve.com
Post time: Oct-13-2022
